Bob,
Somehow, somewhere, either the key or paddle or PTT is closed - at least
the K3 thinks that is true.
You might first check visually to see if you can find the culprit. If
not ---
Remove the mic, key, paddles and your interface from the K3 - then with
K3 power on, plug them in one at a time. If any of them cause the K3 to
go into transmit, you have found the offending one.
73,
Don W3FPR
On 1/14/2014 1:07 PM, Bob KD7YZ wrote:
KAT500 poer off
K3 Power OFF
P/s's all off.
P/S all on
See and Hear KAT500 receive the P/S 12v
Push-on the K3
See "ERR PTT" scrolling on K3 and K3 TX LED is on.
can't figure it out. Have tried CONFIG"PTT to no avail and dunno where
to leave it anyway.
Use also the Tigertronics SignaLink-USB for a year now, fwiw.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
