Oops. Delete that first not. It is possible the pin IS touching another pin…
Jack B, W6FB On Jan 15, 2014, at 9:12 AM, Jack Brindle <[email protected]> wrote: > Bob; > > Check the K3-KPA500 AUX cable. It is possible that one of the pins is bent > and is not touching another pin (or the shell), causing the problem. If so, > try to carefully straighten the pin so as not to break it, although most > likely you would need to replace the cable. > > Jack Brindle, W6FB > > > On Jan 15, 2014, at 9:01 AM, Bob KD7YZ <[email protected]> wrote: > >> >> >> I seem to have found that connecting the supplied RCA-Fono cable from >> K3:PTT-OUT to KAT500 PTT (maybe Inhibit?) allows correct turn-on sequence >> w/o K3 Xmit. >> >> Haven't remembered how I had the K3 Config:PTT sett ...PTT OFF-OFF or >> otherwise >> >> Because when computer boots, the rig keys, and K3 is not in "VOX" >> >> >> -- >> >> Bob KD7YZ >> http://www.qrz.com/db/KD7YZ >> www.denstarfarm.us/LGD >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
