I think I would reload ucode from a recent backup. 73, Jim KG0KP -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard Thorne Sent: Sunday, January 26, 2014 8:35 AM To: Oliver Dröse; [email protected] Subject: Re: [Elecraft] Fwd: K3 - No Power Out
Next on my list to try. Thanks Rich - N5ZC On 1/26/2014 8:25 AM, Oliver Dröse wrote: > > Have you tried restoring your config file, Rich? > > 73, Olli - DH8BQA > > > > Am 26.01.2014 15:15, schrieb Richard Thorne: >> An update to my problem. >> >> I've pulled the KPA3 100 watt module (and turned it off in the >> configuration menu) hoping I would have a qrp rig when I was done, >> unfortunately I don't. >> >> I can adjust the power (while Not transmitting) and set it to say >> 12w. As soon as I transmit the rig display's 0 watts >> >> It appears that I may have a problem that requires the K3 to take a >> trip to California. I'll call Elecraft tomorrow. >> >> Rich - N5ZC >> >> >> >> >> -------- Original Message -------- >> Subject: [Elecraft] K3 - No Power Out >> Date: Sat, 25 Jan 2014 20:26:33 -0600 >> From: Richard Thorne <[email protected]> >> To: Elecraft Reflector <[email protected]> >> >> >> >> I was working stations on and off today. >> >> Came back into the shack this evening and tried to work a VK on 15m >> and I had no output power. >> >> I turned the power dial and it was at 0 watts, no problem just turn >> it up. Normally I would progress a 1/10 of a watt at a time up to 12 >> watts then it would increase at 1 watt intervals. This time it >> started at 0 and incremented at 1 watt intervals immediately, strange. >> >> After setting the output to 100 watts and then depressing the >> transmit button for a second it would transmit at 0 watts as >> displayed in the vfo b and vfo A would display --. >> >> I've disconnected the external devices to the acc connection >> (microham mkII in this case along with a KAT500) as well as the >> rs-232 connection to be sure an outside source was not controlling the rig. >> >> I have the KPA3 installed and the rig has been back to Elecraft to >> have the gold pins installed. >> >> Any ideas? >> >> Thanks >> >> Rich - N5ZC >> >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html >> >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net Please help support this >> email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
