Could you have accidentally bumped the "TEST" selection on the mode switch?
Gary KA1J > I was working stations on and off today. > > Came back into the shack this evening and tried to work a VK on 15m > and > I had no output power. > > I turned the power dial and it was at 0 watts, no problem just turn > it > up. Normally I would progress a 1/10 of a watt at a time up to 12 > watts > then it would increase at 1 watt intervals. This time it started at > 0 > and incremented at 1 watt intervals immediately, strange. > > After setting the output to 100 watts and then depressing the > transmit > button for a second it would transmit at 0 watts as displayed in the > vfo > b and vfo A would display --. > > I've disconnected the external devices to the acc connection > (microham > mkII in this case along with a KAT500) as well as the rs-232 > connection > to be sure an outside source was not controlling the rig. > > I have the KPA3 installed and the rig has been back to Elecraft to > have > the gold pins installed. > > Any ideas? > > Thanks > > Rich - N5ZC > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
