Jay,
ERR KEY indicates that the K3 thinks either the key, or paddle, or PTT
(don't forget about PTT over the RS-232 input) is closed when you power
on. Check your key and paddles, footswitches or mic PTT button, and if
necessary, remove the RS-232 cable.
There is also a PTT input on the ACC cable, so if you still have no joy,
remove that cable too.
If you do find it is one of the cables, rather than just a "book on the
key", you will have some more investigation to do.
73,
Don W3FPR
On 1/26/2014 2:21 PM, Jay wrote:
Hi all,
Switched on my K3 this morning and noticed that the VFO B display was showing "ERR
KEY". Will look into the manual for possible reasons, but appreciate any pointers.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
