Thanks Don! Yes, I found my paddle key was closed due to a touching book...:-).
-Jay > Date: Sun, 26 Jan 2014 14:34:44 -0500 > From: [email protected] > To: [email protected]; [email protected] > Subject: Re: [Elecraft] K3: VFO B Display SHowing "ERR KEY" > > Jay, > > ERR KEY indicates that the K3 thinks either the key, or paddle, or PTT > (don't forget about PTT over the RS-232 input) is closed when you power > on. Check your key and paddles, footswitches or mic PTT button, and if > necessary, remove the RS-232 cable. > There is also a PTT input on the ACC cable, so if you still have no joy, > remove that cable too. > If you do find it is one of the cables, rather than just a "book on the > key", you will have some more investigation to do. > > 73, > Don W3FPR > > On 1/26/2014 2:21 PM, Jay wrote: > > Hi all, > > > > > > > > Switched on my K3 this morning and noticed that the VFO B display was > > showing "ERR KEY". Will look into the manual for possible reasons, but > > appreciate any pointers. > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
