Hi all, Improvements are being tested. In addition to better verification of the frequency count, we're going to provide a way for the K3 to send the VFO frequency to the KAT500 so it can pre-load the LC network as you tune. This will all be done in firmware.
73, Wayne N6KR On Jan 28, 2014, at 7:23 AM, XE3/K5ENS <nela...@yahoo.com> wrote: > I know very little about how all this works but my guess is that the problem > maybe in the timing of the KAT500 as to when it decides the K3 has QSY'd. > On SSB the frequency will vary quickly as you speak. If the KAT500 sees a > new frequency for too long of a time it may think the K3 has changed > frequency and invoke a tune. The longer the KAT500 waits to see if the K3 > has actually changed the slower the response the KAT500 will be on a normal > frequency change. > > > Keith ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html