Sorry about that - replace 'per band' with 'per mode' in the post below. 73, Don W3FPR -------------------------------- Bill,
One thing you might want to check is your menu setting for VFO CRS (VFO Coarse Tuning). You could set that to 500 Hz for SSB - it is a per band setting.
That may not help with your request about the SPOT button, but it may be a good substitute.
73, Don W3FPR On 2/2/2014 4:30 PM, Bill Frantz wrote:
A small item for the infinitely long desired feature list: I have noticed that SSB stations usually transmit on multiples of 500 Hz -- For example the Elecraft SSB net 14.3035 MHz and and W1AW/5 on 28.4570 MHz. If pressing SPOT when in SSB mode would set the frequency to the nearest multiple of 500 Hz it would quite useful.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
