Hi Joe, I reduced the power ramp-up rate in FSK-D in conjunction with other changes. I'll improve this in the next beta release. Meanwhile it lags a little in this mode, which is hopefully just a minor inconvenience.
73, Wayne N6KR On Feb 8, 2014, at 3:27 PM, "Joe Subich, W4TV" <[email protected]> wrote: > > Sorry, Wayne. It's not fixed. Although the power adjusts now it still > comes up more than 1 dB low (65 to 75 Watts for 110W commanded) and > takes more than five seconds to reach set output. These tests in > FSK_D. For comparison, in CW power output comes up at more than 90% > of the commanded level and reaches full output in 1 second or less. > > I've performed wattmeter and power calibration - they have little > if any impact on the issue. > > 73, > > ... Joe, W4TV > > > On 2/8/2014 12:23 PM, Wayne Burdick wrote: >> Hi all, >> >> It appears that I've fixed the reported bug in FSK-D mode (RTTY) where power >> could not be increased while transmitting. I know some of you are in the >> middle of an RTTY contest as we speak, and if you'd like to try the new >> firmware, please email me directly. >> >> 73, >> Wayne >> N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
