> Meanwhile it lags a little in this mode, which is hopefully just a
> minor inconvenience.
It's more than a little lag <G> - particularly on those occasions the
lower level is nearly 3 dB low to start. I'm looking forward to the
next one. Perhaps the update rate should be adaptive - fast for the
first couple seconds of a transmission and then slowing down after the
power has had a chance to stabilize ...
73,
... Joe, W4TV
On 2/8/2014 7:35 PM, Wayne Burdick wrote:
Hi Joe,
I reduced the power ramp-up rate in FSK-D in conjunction with other changes.
I'll improve this in the next beta release. Meanwhile it lags a little in this
mode, which is hopefully just a minor inconvenience.
73,
Wayne
N6KR
On Feb 8, 2014, at 3:27 PM, "Joe Subich, W4TV" <[email protected]> wrote:
Sorry, Wayne. It's not fixed. Although the power adjusts now it still
comes up more than 1 dB low (65 to 75 Watts for 110W commanded) and
takes more than five seconds to reach set output. These tests in
FSK_D. For comparison, in CW power output comes up at more than 90%
of the commanded level and reaches full output in 1 second or less.
I've performed wattmeter and power calibration - they have little
if any impact on the issue.
73,
... Joe, W4TV
On 2/8/2014 12:23 PM, Wayne Burdick wrote:
Hi all,
It appears that I've fixed the reported bug in FSK-D mode (RTTY) where power
could not be increased while transmitting. I know some of you are in the middle
of an RTTY contest as we speak, and if you'd like to try the new firmware,
please email me directly.
73,
Wayne
N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
