It's the USB to serial. But like Wayne mentioned there's a fix. Thanks
-------- Original message -------- From: bill conkling <[email protected]> Date: 08/02/2014 21:49 (GMT-05:00) To: [email protected] Cc: Elecraft <[email protected]> Subject: Re: [Elecraft] Issue with the KX3, KXPA100 and software on 17m...can "hear" the serial commands Are you using a RS232 cable or a USB to serial cable? ...bill nr4c Sent from my Verizon Wireless 4G LTE DROID [email protected] wrote: Hi I was wondering if anyone else has this issue: I have the KX3 and the KXPA100 connected through the wiring kit and I am connecting to the combo with Ham Radio Deluxe or Win4K3Suite. If I go to 17m, and the software is running I can literally hear the serial commands in my headphones. It sounds like tons of clicks, and chirping noises on 17M only. I also hear it on 12m but much quieter.It also shows up on the s-meter as an s-5 pulsing. If I turn off the KXPA100, the noise goes away. I have tried a different serial port cable connected to a different port and there is no difference. It is definitely coming from the KXPA100. I never had this before I installed the amp. Can anyone here confirm to me if this is just my setup or are other experiencing the same issues? Thanks, Tom va2fsq ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
