Bekir, The power output from your K2 is indeed low and your current draw is higher than normal. When this condition exists, the first thing to suspect is the Low Pass Filters.
Check the inductors for the proper number of turns (count the turns as thay pass through the center of the core - if the outside is counted, you may be one turn in error). Check the capacitors for proper values (look on the schematic to see the correct values). 73, Don W3FPR > -----Original Message----- > > Although my QTH is blocked by a nearby hill in the East and > another nearish > hill in the North, I have worked quite a few countries with less than 8 > Watts. (My rig does not go above 7.1 to 7.3 Watts, giving a Hi > Cur warning. > I just hope this is normal. Cal Cur is set at 3.5 Ampers) > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
