> Any thoughts on what I should do or what setting I am missing. I have > the PTT set currently for Config:Off-RTS. I am wondering if this is > where I am going wrong.
microHAM interfaces *do not* support DTR/RTS on the serial port. Set CONFIG: PTT-KEY to OFF-OFF when connecting the K3 to *any* microHAM interface. 73, ... Joe, W4TV On 2/13/2014 12:34 PM, Keith Heimbold wrote:
Been reinstalling my K3 serial 1391 back into the shack and was connecting it to the MicroHam USB 3 and was getting some PTT Errors that aren't there if I remove the USB 3. Does all sorts of funky things with the display like blanking out the frequency in the VFO, and other general inconveniences. I also have a BY-1 paddle set up and have the key output connected to my SPE 1K. I plan to build a cable for ALC this weekend but have been running it through amp more for antenna switching purposes than for QRO. Any thoughts on what I should do or what setting I am missing. I have the PTT set currently for Config:Off-RTS. I am wondering if this is where I am going wrong. Thanks, Keith AK6ZZ Sent from my iPhone please excuse typos ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
