Carl,
Check your SignaLink configuration (see the SignaLink documentation) to
be certain it is set for Line output rather than Mic level output - you
should not have to set your soundcard level to the maximum.
Note on the K3, you must drive the audio sufficiently to produce 4 bars
solid on the ALC meter with the 5th bar flickering if you are to be able
to control power output level properly with the power knob. Normal Line
levels can do that easily, but mic levels will not allow that to happen.
Note carefully that while you may have been instructed with prior rigs
to set for maximum power and adjust the audio for the power desired,
that does *not* work with the K3, and will result in "power creep".
Adjust the audio as instructed in the manual (4 bars on the ALC meter
with the 5th bar flickering) and adjust to the desired power level with
the power knob. The K3 power control is different than most all other
transceivers in that it uses a closed loop and will attempt to adjust
the power level to that requested by the power knob regardless of the
audio drive.
73,
Don W3FPR
On 2/15/2014 6:14 PM, Carl Yaffey wrote:
I’ve used a SignaLink SL-1+ for years with an Icom 756PROIII and a laptop.
After getting my K3 up and running I decided to try hooking up the SIgnaLink. I
bought the cable that connects it to the line in and line out and PTT
connectors of the K3. It seems to work OK except that there didn’t seem to be
much audio getting into the K3’s line in. Yes, I turned off the mic input and
turned on line in. Yes, I maxed the laptop’s audio out. Finally, So, as an
experiment, I ran the laptop’s audio out into a pair of PC speakers and ran the
headphone output of the PC speakers into the K3. Lots more audio out of the
speakers and I can now get plenty into the K3. I suppose the problem was just
that the K3 needs more juice into line in than my Icom needed. Oh, well. Live
and learn.
Carl Yaffey K8NU
Banjo, guitar, bass, mandolin, dobro.
recording studio.
[email protected]
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
