It is sad that QRQ mode has no RIT !!! Cw up from 30 to 35 WPM hast o use QRQ mode because of struggling dits and dahs
Many highspeed ops VHSC EHSC has changed from k3 to FT5000 because of leaking RIT with QRQ with K3 Maybe Wayne will sharpen Firmware in future for QRQ mode If rit/split is necessary i use 2nd RX but this is not so comfortable 73 Oe6kyg Klaus -----Ursprüngliche Nachricht----- Von: [email protected] [mailto:[email protected]] Im Auftrag von Don Wilhelm Gesendet: Samstag, 15. Februar 2014 22:06 An: Jorge Diez - CX6VM; 'Elecraft Reflector' Betreff: Re: [Elecraft] CW QRQ and SPLIT Jorge, AFAIK, probably not. The frequency must be shifted from RX to TX, and with QRQ in effect it is not possible to shift that fast. A K3 with 'chirp' on the ham bands would not be a nice thing to hear. 73, Don W3FPR On 2/15/2014 2:33 PM, Jorge Diez - CX6VM wrote: > I saw in the manual of K3 that CW QRQ is "temporarily turned OFF" with > SPLIT. > > Will be in the future any way to use it in SPLIT mode or is impossible? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
