I don't know how much over 0.64 volts is bad, but I am getting 0.656. I didn't realize that a web reply was cutting off what I was replying to. I always hit the reply button and assumed it included the original text.
Jeremy Don Wilhelm-4 wrote > Jeremy, > > A power reading of 0.1, 0.2 or 0.3 is only residual noise on the power > detection circuits. Since you do not have Q7 and Q8 installed, your > real power output is zero. > > Yes, go ahead and change Q11 and Q13. That is not certain to change > anything, but it will do no harm. > A slightly lower than normal bias voltage for the PA transistors is not > a problem, but if it is higher than 0.64 volts, that is a problem that > should warn you not to install Q7 and Q8 until it is resolved. > > 73, > Don W3FPR -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Won-t-power-on-tp7584083p7584407.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
