Yes,
The KAT500 needed to be powered first. I also used to do that. That was
in the 'older firmware times'.
With the current FW, up till now I never bumped into any issue no
matter which device was turned on first.
Arie PA3A
Jack Brindle schreef op 21-2-2014 20:34:
The KAT500 needs to be powered on whenever the K3 is on in order to avoid
loading the Auxbus. It can be powered up at the same time, but must be on
before the K3 completes its initialization.
The KPA500 has no restriction, and can be powered on any time before or after
the K3 is turned on.
Jack Brindle, W6FB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
