It sure will Doug and it is very nice. You need the KPAK3AUX cable set connecting the K3 to the KPA500 and need to set the K3 PWR SET to Per Band. See my K-Line introduction and short set-up guide at: http://www.ke7x.com/home/k-line-introduction-and-set-up-guide
73, Fred KE7X "The Elecraft K3: Design, Configuration and Operation 2nd ed" "The Elecraft KX3 - Going for the summit" www.ke7x.com or www.lulu.com (Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station") -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Doug Welborn Sent: Monday, February 24, 2014 7:36 AM To: [email protected] Subject: [Elecraft] Auto power set K-3 with KPA-500 Does anyone know if the K3 will automatically reduce power when the KPA500 is in "operate mode" and then return to previous power setting when KPA500 is returned to "Standby". It is easy to forget sometimes to set or reset the power on K3 for the KPA500. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
