Has anyone else observed that the Power Output of the KX3 is changed by the setting of the WATTMTR value?
For example on 20M, CW mode into a dummy load, ATU in bypass. Power set at 10 watts, I measure 6.8 watts with a WATTMTR setting of 1.0. But with a value of .070, I measure 9.9. The factory sets it at 0.84 I measure 8.2 watts at that value. At a setting of 12 watts I measure a power out of 8.2 watts at a WATTMTR setting of 1.00 and 11.5 watts with a WATTMTR value of 0.70. I get similar results on all bands. The power shown on the display matches what is selected, and does not change with different WATTMTR settings. 73s Ron DA1YS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
