Page 63 of the manual. if you have anything on the ACC connector it must be
removed for this to work.
On 3/13/2014 11:15 AM, [email protected] wrote:
Can you tell me where to find the "procedure" just in case?
73 De Brian W3BW
Brian F. Wruble, C.F.A.
"Leap and the net will appear."
On Mar 13, 2014, at 10:21 AM, Roger D Johnson<[email protected]> wrote:
I do not dislike Power Poles and use them for many cords around my station. The
problem is that
my K3 is fed from the power supply using large (stiff) diameter conductors.
Brushing up against
these can cause them to disconnect from the K3. If the K3 is powered up, this
can result in the K3
going off to never-never land which requires a special, and not well
documented, procedure to
get it running again. I think the K3 needs a better connector here.
73, Roger
On 3/13/2014 9:52 AM, Mike Harris wrote:
Not a flame just a simple power pole observation.
Never had a problem, never fallen out (K2, K3, XV50) even when tugging units
around, soldered not crimped, no $40. crimper, not colour blind so arranged the
cable and connectors to match the equipment.
Each to his own I guess.
Regards,
Mike VP8NO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
