Hi Gary, I understand your need and as others have indicated it's not really how most folks use markers. My findings have been that the markers are not optimum for split DX chasing.
When DX is operating split I immediately hold the SPLIT button and turn on the SUB RX and then spin the VFO B knob on the K3 while observing the magenta and red (split) cursors on the P3. With the SUB RX turned on I can hear all of the callers as I'm turning the VFO B dial and I am able to more finely drop my signal in then by just visualizing its placement with the P3 alone. This also does away with the necessity of pushing the P3 knob. I have found this to be quicker, more accurate, and more intuitive then using markers. 73, Mike K2MK Gary Smith-2 wrote > Reading the P3 screen I see a station transmitting. I use Marker A > (Green) to pin me on that desired station as soon as I tap the knob > to QSY me to a desired signal. > > I listen to the station and they say UP so I know to hold in the MKR > button to activate B ((Magenta) I see where the last transmission is > and I place the Magenta marker at that location and tap: The Sub Rx > goes to that frequency where the DX was last listening but sub is not > engaged, it just sits on that frequency and does nothing with it. > > Problem is that if I don't then reach over and manually hold the > split button on the K3 itself to have the K3 transmit on the DX > listening frequency, I'll still keep transmitting on the DX transmit > frequency because the K3 will not have gone split; its as if the > procedure is halted half way and it shouldn't function this way, its > not intuitive. > > If I'm going to the effort to engage Marker B to QSY its because I > want to transmit on the Marker B frequency. What do I have to the do > differently to force the K3 go split to transmit on the B freq when I > tap on MKR B? > > Thanks, > > Gary > KA1J -- View this message in context: http://elecraft.365791.n2.nabble.com/P3-marker-B-transmit-freq-tp7585638p7585653.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
