On Thu, Mar 20, 2014 at 7:40 PM, Doug Ellmore Sr. <[email protected]> wrote:
> Through N1MM and K3 software commands, I am able to send keying messages of
> specific text from n1mm to the K3. In order to pass variables, such as the
> other station and serial number, I need help to figure that out.
>
> winkeyer command example to send cq from N1MM:
>
> F1 RUN CQ,*cq {CQ MYCALL} {MYCALL} TEST*
> K3 Command sent to K3 on com1 from N1MM:
>
> F1 Run CQ,* {CATA1ASC ky cq na1dx na1dx test;}*
> What I need to do is send the variable {TX} which is the station to work
(in addition to Rich's comments:)
{TX} is not a variable, and has nothing to do with the station you're
working - rather it is a macro symbol that asserts PTT to the
transceiver. It is not necessary to assert PTT to the K3 utilise the
KY command.
http://n1mm.hamdocs.com/tiki-index.php?page=Macros&structure=N1MM+Logger+Documentation
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
