> For CW keying with a paddle, I believe that the keyer in the RRC is
> used - NOT the keyer in the K3/0...
Correct.
> so I'm not sure how you would do remote paddle CW without the
> RRC. AFAIK, there is NOT code in the K3 firmware to accept paddle
> input and relay it over the serial connection to the remote K3.
The paddle input connections from the K3/0 mini are routed just to the
DB15 on it's back side to have a neat one cable solution between mini
and RRC. So you have the single dit and dah lines on dedicated pins on
the DB15 and can put that onto the paddle input of the
locally-to-be-remoted K3. Think of it as a cable extension. ;-) Same as
for mic and speaker as well as hand-key ...
73, Olli - DH8BQA
--
Contest, DX & radio projects: http://www.dh8bqa.de
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
