Larry,
You *should* be able to do the firmware upgrades with the cabling in place.
Of course, if you have any difficulty, the first order of
troubleshooting is to isolate the gear that is producing problems.
73,
Don W3FPR
On 3/25/2014 10:11 AM, Larry Libsch wrote:
Group -
My K3, KPA500, KAT500, two USB soundcards and an SDR are all
cabled together and playing well. I would like to upgrade the firmware
in all 3 K line devices. Is it necessary to completely or partially
remove cables before attaching my computer via USB - serial port cable
to each K line device in turn and doing its firmware update? Removing
and reassembling the cables is possible, but not trivial.
K4KGG, Larry
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w3...@embarqmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
