Nigel, I use a thin nosed set of pliers to bend and eventually break off the male pin. On the K2 end (female), I just insert a wire or the tip of a toothpick into pin 4 (use whatever will stay firmly in the hole). There is nothing more to it - no magic or other tricks.
73, Don W3FPR > -----Original Message----- > > Thanks Don, for the reminder. > > I know in the past it has been posted to insert a pin in terminal 4 on the > K2 and remove the same from the corresponding plug to make them unique to > the K2. > How's the easiest way to do this? Can you pull the pin from the > male plug > and insert it into the female one or do you need to wreck another one? > > > 73, Nigel ZL2DF > > _______________________________________________ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com