"Lance Collister, W7GJ" <[email protected]> wrote: > Has anybody heard anything regarding the timing of the KX3-2M module for the > KX3? Is it still planned for high enough stability for JT65B mode and a > maximum power of 10w?
Hi Lance, I'm not sure where you got that figure. Our postings on this topic are summarized in an FAQ (http://www.elecraft.com/manual/KX3-2M%20FAQ.htm). - Max power is 3 W. - The module is unlikely to support very narrowband modes, because short-term local oscillator excursions at the I.F. (48 MHz) are, in effect, multiplied by about 3. FM and AM modes can be used with normal factory temperature compensation on 2 m. To use CW/SSB, the extended VFO temperature compensation procedure will be required. This level of compensation would also allow the use of narrow-shift RTTY. But JT65 and similar modes on 2 meters would probably require tighter frequency stability. 73, Wayne N6KR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
