Since your saved configuration did not work, that configuration may have
an error.
Doing an EEINIT without going through the entire calibration procedure
is bound to produce multiple errors of unknown types.
If your KX3 is a factory built unit, Elecraft may be able to retrieve
the factory configuration file for you. Contact [email protected]
to see if they can send you the file.
You can do *all* the calibration manually. Follow the calibration
procedures in the manual.
73,
Don W3FPR
On 4/8/2014 2:56 AM, VaibhaV Sharma wrote:
On Apr 7, 2014, at 11:40 PM, VaibhaV Sharma <[email protected]> wrote:
Hello,
Just a few minutes ago, my KX3 started showing the ATU as “not inst” in the
"ATU.x MD” menu.
Was tuning around on 20m using Ham Radio Deluxe rig control and the KX3 serial
communication became very sluggish. I reset the serial port and restarted Ham
Radio Deluxe but it was still sluggish (frequency changes from the software
were taking several seconds).
I then did an EE INIT and restored KX3 configuration from backup but the ATU
text does not appear on the main screen and ATU still shows “not inst”.
Opened up the KX3 and I don’t smell anything other than the nice new PCB smell.
:)
Any ideas?
More info -
I went through the EE INIT process again and did not restore configuration this
time.
Followed the manual to enable optional ATU and KXFL3 modules and now the radio
lets me enable ATU in the menu but does not let me transmit. When I try to
initiate an ATU tuning cycle or mic transmit, I see an error -
d = 000
ERR TxC
When I press the “DISP” button to clear, I get the next error -
ERR TXS
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
