There is a point at which a discussion thread goes on too long, but that was not the case for the QRQ issue - at least not for me. And that qualifier is important, I submit. I have been an Elecraft owner for only about three years, and have been following the reflector for, I would guess, around one. I don¹t recall having seen the QRQ/shift-split issue taken up before, and as a 100% CW op operating at the cusp of the phenomenon (about 30-35 wpm), I was interested in every one of the questions and answers everyone sent in. My point is, the fact that an issue has been explored before doesn¹t make it useless to take it up again for the benefit of those who hadn¹t been in on it before (yes, I know there¹s an archive somewhere) ‹ so long, that is, that the contributions continue to be substantive contributions. I for one am grateful for almost everything I¹ve read here, on this subject and almost every other. TNX to all . . .
Ted, KN1CBR (K3-P3-KAT500-KPA500-KX3 and PX3 on order.) -------------------------- > >Message: 18 >Date: Sun, 13 Apr 2014 11:17:37 -0700 >From: "Lynn W. Taylor, WB6UUT" <[email protected]> >To: [email protected] >Subject: Re: [Elecraft] Side Effects of QRQ On The K3 >Message-ID: <[email protected]> >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >It's a total non-issue to me. I just wish the discussion was a tiny bit >more civil. > >73 -- Lynn > >On 4/13/2014 9:48 AM, KQ8M wrote: >> Am I led to believe, then, that because you and Toby don't like the >>subject that it shouldn't be discussed. > > > >------------------------------ > >Message: 19 >Date: Sun, 13 Apr 2014 11:23:11 -0700 >From: Phil Wheeler <[email protected]> >To: [email protected] >Subject: Re: [Elecraft] Side Effects of QRQ On The K3 >Message-ID: <[email protected]> >Content-Type: text/plain; charset=ISO-8859-1; format=flowed > >Or given Wayne's "We intend to improve this in a >future firmware release." message of this morning, >maybe the discussion will just end. > >73, Phil W7OX > >On 4/13/14, 11:17 AM, Lynn W. Taylor, WB6UUT wrote: >> It's a total non-issue to me. I just wish the >> discussion was a tiny bit more civil. >> >> 73 -- Lynn >> >> On 4/13/2014 9:48 AM, KQ8M wrote: >>> Am I led to believe, then, that because you and >>> Toby don't like the subject that it shouldn't >>> be discussed. > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
