Brett, Thanks for that bit of info, I had decided I was going to try just that, your note indicates it will work, so I am a happy camper now. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Sun, 2014-04-13 at 22:29 +0000, Brett Graham wrote: > NK7Z said: > > > However when I saw a discussion about malformed CW, I wanted to know > > why... That did worry me a bit... I have seen many groups who can find > > no wrong with a product, even if the product has issues... I was > > starting to get the feeling the K3 might be that way... > > If you don't mind your code element lengths varying by ~10 msec (still > an appreciable quarter of an element at the slow speed of 30 wpm), then > that portion of the Brand-E user community that insists this isn't a > problem are correct. > > For everybody else, the solution to the problem (with the radio, not the > user group) is to assert PTT. Then the RF more faithfully follows the > keying. > > Yes, you'll have to let off the PTT for the rig to drop into receive, > but since the K3's "QSK" is more of an inter-character - rather than > intra-character - break-in, you literally aren't missing anything. > > -ex-VR2BG/p. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
