But, if Elecraft had a USB port on the back of the K3, then _Elecraft_
would be the only one that had to worry about fake chips. The end user
would only have to supply a USB cable....
73, Ross N4RP
On 4/14/2014 2:19 PM, Ingo Meyer, DK3RED wrote:
Hello Don,
With the serial cable, I can use a real serial port or a good USB to
serial adapter to
program my handheld.
I have to disagree with you. Yes, a RS-232 interface is the best
choice, if you can use a RS-232 interface at your computer. If not,
also you will use an adapter. But what is a RS-232 to USB adapter?
Right, a chip from Prolific or FTDI ( hopefully). Nobody is protected
from a fake chip.
--
FCC Section 97.313(a) "At all times, an amateur station must use the minimum
transmitter power necessary to carry out the desired communications."
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
