Sounds good, David. I've done substantial rework,
too -- but mostly due to the KPA500 (needed RG-213
to replace RG-8X runs in the shack -- and added
switches so I can use 3/4 antennas with K3/500 or
other rigs, like K1, KX1, K2/100 and KX3).
I'm never likely to post pictures of my shack: It
will never be that neat, I fear.
Congrats on your K3! I've had mine a couple of
months or so, and I expect to still be learning a
year from now (e.g., just set it up to do PSK31
with a SignaLink USB today).
73, Phil w7ox
On 4/16/14, 5:16 PM, David Cole wrote:
Hi All,
The radio arrived, all is working well! The book by KE7X arrived a day
later...
I have the rig on air, and it appears to be working great. Quite a
learning curve... But I am taking it one step at a time, getting each
function working, then rewiring the shack to accommodate.
I decided to redo the entire station as well... Pulled every item off
the desk, and started by replacing all grounds with 1 inch braid. Moved
to AC power, then 12 Volt power, then to signal and control.
Much neater behind the desk now. I mounted all the power outlets,
etc... I'll have photos on the web site soon...
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
