Windows maintains a separate output level for *every program*. Open Windows Volume Mixer, select the "Headset Earphone (microHAM CODEC)" output, place fldigi into transmit (generating audio) and adjust the slider marked fldigi-AA8R to drive the K3 to 4-5 bars of ALC.
73, ... Joe, W4TV On 4/18/2014 10:21 AM, Randy wrote:
Need some help. I have made several PSK, RTTY, MFSK and Domino contacts using FLDigi but I am only able to get about 18 watts of output out of the K3 even though the K3 is set to 100 watts. My set up is a K3, MicroKeyerII and FLDigi(3.21.81). The K3 is set to "Data A", FLDigi is configured using "HamLib" with "Rig" set to Elecraft K3/KX3 (Beta), Com 4, baud rate = 38400, 1 stopbits and Sideband set "Rig Mode". I tried using "RigCat" after downloading the K3.xml but as soon as I click on the "Initialize" button in Fldigi the Com port closes in Microham router(ver. 8.4.6). Taking this one step further using "RigCat".... FLDigi still sees the MKII because when I click on a micro in FlDigi the MKII 'SC' LED lights up but doesn't key the K3. I can achieve 100 watt out from the K3 using MKII and N1MM or WinWarbler but that is setting the K3 in "FSK D" mode. Any suggestions on what I am doing wrong with FLDigi? Randy, AA8R ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com