Randy, I had a similar situation. After many tries and tests the problem was that the audio cables - although expensive - were of bad quality. Just using another set I was able to have the full output. 73
Reinaldo, YV5AM On 4/18/2014 10:21 AM, Randy wrote: > Need some help. I have made several PSK, RTTY, MFSK and Domino > contacts using FLDigi but I am only able to get about 18 watts of > output out of the K3 even though the K3 is set to 100 watts. My set > up is a K3, MicroKeyerII and FLDigi(3.21.81). The K3 is set to "Data > A", FLDigi is configured using "HamLib" with "Rig" set to Elecraft > K3/KX3 (Beta), Com 4, baud rate = 38400, 1 stopbits and Sideband set > "Rig Mode". I tried using "RigCat" after downloading the K3.xml but > as soon as I click on the "Initialize" button in Fldigi the Com port > closes in Microham router(ver. 8.4.6). Taking this one step further > using "RigCat".... FLDigi still sees the MKII because when I click on > a micro in FlDigi the MKII 'SC' LED lights up but doesn't key the K3. > > I can achieve 100 watt out from the K3 using MKII and N1MM or > WinWarbler but that is setting the K3 in "FSK D" mode. Any > suggestions on what I am doing wrong with FLDigi? --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
