Have you performed the audio configuration of microKEYER II as described in the MK II Users Manual? Follow that procedure *exactly* as written - do not move on until you achieve the results described.
73, ... Joe, W4TV On 4/19/2014 12:57 PM, Christopher Soames wrote:
Hi All, have been having problems with PSK on my K3. I am using a Microham2 Keyer into the K3 via the D connector and appropriate connections on the K3. I cannot TX though as I get no signal to the K3 output. In Test mode with TX flashing on the K3 I see no indication of ALC readings when I adjust the Mic knob when compression and ALC display is shown. When meter is in pwr mode `I see no indication of any power out either. When in normal data TX mode (Not test) I have no indications of alc or power showing on the bar graph either, but the K3 TX red light comes on to indicate TXing. I have no replies to an calls and a colleague who was testing with me did not RX anything from me at all. I can RX fine. All other modes work fine RTTY SSB and CW. Any help gratefully received.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
