I would send an email to [email protected] with the details. They usually respond to me within hours. I know as I have been having issues with my KRC2 holding its mappings.
Mike va3mw On Wed, Apr 23, 2014 at 9:07 AM, Don Wilhelm <[email protected]> wrote: > Steve, > > I would try another sensor before digging into the W2 proper. > > 73, > Don W3FPR > > > On 4/23/2014 8:43 AM, Steve Bunting wrote: > >> Hi everyone, >> >> >> I have a W2 Watt meter and 2KW sensor that I haven't used for some time. I >> loaned it out to a club mate who reported it DOA. The unit self-tests OK >> and I've swapped the 8 way RJ45 cable for an out of the packet new one. >> I've tested it thoroughly on my bench and have found a few issues that I >> would like help resolving: >> >> >> When the sensor is plugged into port 1 I get full scale (high) SWR with no >> rf applied. When RF is applied no forward power is registered. >> >> >> When I plug the sensor into port 2, the meter functions, but 100W input >> from my K2 is reported as 80W. I have checked the K2 with other power >> meters and the all say 100W +/- 5%. The W2 also reports an SWR of 1.5:1 >> when I use any of my dummy loads (or antennas!). They can't all be bad on >> every HF band! >> >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
