Graham,
Turn on TX TEST mode and see if that condition is still present.
If it is, double check the MON setting to be certain you did not
inadvertently change it while trying to adjust the power level or
compression.
If it is gone with TX TEST, next try it while transmitting into a dummy
load.
If it is still gone with the dummy load, I would suggest you look to see
what has changed in your antenna system because at that point I would
suspect some type of RF feedback.
73,
Don W3FPR
On 4/30/2014 3:51 PM, Graham Pemberton wrote:
Hi,
Yes, definitely coming from the K3 I have not got anything connected at all
apart from the antenna.
Graham
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
