Hi, Many thanks to Don, Jim and others who took the time to answer my post, it was the MON setting that was causing the issue I must have inadvertently changed it as Don said below, now all working fine again. I’m glad it was only finger trouble.
Once again many thanks for the help it was very much appreciated. 73 de Graham G7NEH On 30 Apr 2014, at 21:07, Don Wilhelm <[email protected]> wrote: > Graham, > > Turn on TX TEST mode and see if that condition is still present. > If it is, double check the MON setting to be certain you did not > inadvertently change it while trying to adjust the power level or compression. > > If it is gone with TX TEST, next try it while transmitting into a dummy load. > If it is still gone with the dummy load, I would suggest you look to see what > has changed in your antenna system because at that point I would suspect some > type of RF feedback. > > 73, > Don W3FPR > > On 4/30/2014 3:51 PM, Graham Pemberton wrote: >> Hi, >> Yes, definitely coming from the K3 I have not got anything connected at all >> apart from the antenna. >> >> Graham >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
