On 5/9/2014 7:36 AM, Slava Baytalskiy wrote:
Hi Don, list!
I wanted to ask you if it would be possible to make a cable for the Signalink
USB box to connect to the K3's 8-pin front side mic connector?
I have the Signalink box that i'm using with my Yaesu 857D but i want to also
try it with the K3.
The K3's rear line-in is currently taken by my audio stuff.
Line out is free for now.
I see that RigBlaster has an option of using K3's 8-pin, so i'm sure Signalink
should be able to use that as well, right?
If all the necessary pins are there i could make up a CAT5 (or even 6) cable
with RJ-45.
Please advise.
Thanks in advance.
__________________
Slava (Sal) B, W2RMS
[email protected]
Do you have the tools for crimping RJ-45 connectors on CAT5/6?
If not buy the proper cable from Signalink. It's cheaper.
--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
