Yes so long as you aren't trying to send the same data to two devices. If you are trying to send band data to two devices, I'm not sure if that would work or not.
Currently I have one which provides my amp with band data and the other side to my 6m preamp. I wanted to add RTTY from my MicroKeyer II and that comes via the ACC line so I'm awaiting the arrival of a second Wye for that. All three "ports" are independent data so no conflict. Pete, W1RM -----Original Message----- From: Elecraft [mailto:[email protected]] On Behalf Of Richard Thorne Sent: Monday, May 12, 2014 7:48 AM To: Elecraft Reflector Subject: [Elecraft] K3 - Accessory Jack - How Many Wye Cables? Currently I have a wye cable attached to the accessory jack on the back of my K3 which in turn is connected to a microham device and the KAT-500 tuner. I have a need to supply band data to another device, can I connect another wye to the current wye so I can connect 3 devices to the accessory jack? Thanks Rich - N5ZC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
