the K3 is not like other rigs you must first set the K3's ALC to show 4 bars with the 5th bar flickering
then set the pwr out to the power level you want to use On 5/12/2014 8:59 AM, OH9VD wrote:
I have set the K3/100 output power to 10W. When I start to send in JT65-mode the power rises slowly from 2W to 10W after few send/receive periods. After reaching the 10W the power stabilizes. Everything seems to work properly except the power instability, anyway I can have qso's with JT65 and JT9. The problem is not dependent of band I use (at least bands from 20m up). I wonder if there anything I can do for the little anoying problem? I have the newest firmware installed and I use the newest version of WSJT-X. 73 de OH9VD, Jarmo
GB & 73 K5OAIS am Morgan ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
