Have you tried using XIT? I seem to remember working one of the W1AW/x
stations that was listening up 2 using the XIT control to offset my
transmitter.
Jim, W4ATK
On 5/13/2014 8:06 AM, Bob Myers wrote:
PSK31 SPLIT:
Folks,
It seems the solution is there is no solution. PSK31 SPLIT appears unsupported
in the K3 and the KX3. The argument seems to be PSK31 is never used in SPLIT
operation. But W1AW/* uses Split for pileups. And many DXpeditions have used it
(T32C for instance). While I rarely use any digital mode other than CW, I
thought it was nifty to have RTTY and PSK31 as part of the K3. Turns out it is
near nifty. :)
Ah, but maybe SPLIT for PSK31 is on on the list of things to come later… or
have I missed something?
—Bob W1XT, Sun City West, Arizona
On May 12, 2014, at 12:55 PM, Bob Myers <[email protected]> wrote:
K3 PSK31 will not allow Split operation.
New kit K3 S/N 8156 basic setup, one 250 Hz filter option. No other options.
In PSK-D mode, the K3 will not allow receiving on VFO A and transmitting on VFO
B. The message SPL N/A comes up when holding the Split button.
In FSK-D RTTY Split works fine. Other modes work fine for Split as well.
Both VFO A and VFO B are on the same mode and band.
Is there some reason that would cause Split not to work with PSK31?
Thanks,
Bob W1XT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
