Thanks everyone. For every complicated question, there is a simple answer: XIT. Gee, amazing.
--W1XT On May 13, 2014, at 6:06 AM, Bob Myers <[email protected]> wrote: > PSK31 SPLIT: > > Folks, > > It seems the solution is there is no solution. PSK31 SPLIT appears > unsupported in the K3 and the KX3. The argument seems to be PSK31 is never > used in SPLIT operation. But W1AW/* uses Split for pileups. And many > DXpeditions have used it (T32C for instance). While I rarely use any digital > mode other than CW, I thought it was nifty to have RTTY and PSK31 as part of > the K3. Turns out it is near nifty. :) > > Ah, but maybe SPLIT for PSK31 is on on the list of things to come later… or > have I missed something? > > —Bob W1XT, Sun City West, Arizona > > > > On May 12, 2014, at 12:55 PM, Bob Myers <[email protected]> wrote: > >> K3 PSK31 will not allow Split operation. >> >> New kit K3 S/N 8156 basic setup, one 250 Hz filter option. No other options. >> >> In PSK-D mode, the K3 will not allow receiving on VFO A and transmitting on >> VFO B. The message SPL N/A comes up when holding the Split button. >> >> In FSK-D RTTY Split works fine. Other modes work fine for Split as well. >> >> Both VFO A and VFO B are on the same mode and band. >> >> Is there some reason that would cause Split not to work with PSK31? >> >> Thanks, >> >> Bob W1XT > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
