Buddy,
That sounds like the PTT in the SignaLink box has broken.
HRD has an option to send PTT via a K3 command - try setting that on and
see if things work correctly.
73,
Don W3FPR
On 5/31/2014 9:32 AM, buddy s wrote:
haven't updated k3 firmware
haven't updated HRD software
haven't updated windows xp software
been using hrd with signalink and k3 for months, until 2 days ago. i
rebooted pc, to no avail.
in CW mode PTT on sihnalink does not come on when transmit initiated, nor
does light on k3
in psk mode, PTT on signalink does not come on, but transmit light on k3
does, no power from radio
in rtty mode, same symptoms as psk
any ideas/suggestions would be appreciated
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
