Interesting coincidence is that i just finished hooking up my K3 to the Signalink USB and HRD. Like 11 minutes ago. The cable i use has 3 plugs: line in, line out and PTT. I didn't connect the PTT at all because i'm using that jack on the K3 for my foot switch. So HRD keys the radio via CAT. Works fine. __________________ Slava (Sal) B, W2RMS [email protected]
On May 31, 2014, at 9:36 AM, Don Wilhelm <[email protected]> wrote: > Buddy, > > That sounds like the PTT in the SignaLink box has broken. > HRD has an option to send PTT via a K3 command - try setting that on and see > if things work correctly. > > 73, > Don W3FPR > > On 5/31/2014 9:32 AM, buddy s wrote: >> haven't updated k3 firmware >> haven't updated HRD software >> haven't updated windows xp software >> >> been using hrd with signalink and k3 for months, until 2 days ago. i >> rebooted pc, to no avail. >> >> in CW mode PTT on sihnalink does not come on when transmit initiated, nor >> does light on k3 >> >> in psk mode, PTT on signalink does not come on, but transmit light on k3 >> does, no power from radio >> >> in rtty mode, same symptoms as psk >> >> any ideas/suggestions would be appreciated >> > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
