Hi Dave, I've have just repeated my measurements of the 7.080Mhz sprog on 398.4MHz and posted some screen-shots on my blog. See here: http://www.g0hww.net/2014/06/kx3-uhf-emissions.html
Cheers, 73 Darren, G0HWW On 28/06/14 10:30, Dave wrote: > Hi Darren, > > I have a later KX3, number 5111, with similar options to you, built in ASTU > and > KX3 hardware, but I don't have the battery charger or additional heatsink > options. > > I built mine from the kit. It was very straight forward but I did buy an > anti-static mat first. > > BTW - I made a mistake in labelling those pictures! The 1st is KX3 off and the > second KX3 on. I'll issue an ammendment just in case it causes confusion > later. > > Good luck in tracking it down, I would be interested to see your screen grabs > showing the effects that you are seeing between on and off, so that I can > compare them to my own results. I'm downloading updated software for the RF > Explorer, which may improve the resolution of the pictures. > > Cheers - Dave (G0DJA) > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
