Hi all, What EXACTLY is the difference between "AFSK A", and "DATA A".
Here is why I ask: In AFSK A Mode: While using MixW, and looking at the MixW screen, and in USB on the K3, as I tune using the knob, the MixW screen shows the signal stuck to a frequency on the top calibration marks on MixW. The signal never moves from the frequency indicated on the MixW software in the waterfall. In DATA A Mode: All settings the same with the exception of switching from AFSK A to DATA A. The signal moves relative to the frequency marks on MixW. i.e. if the signal started at 14.0000, as I tune the knob, MixW tracks the frequency, moving the scale above the waterfall, while the signal appears to move independently of the waterfall calibration marks... I have tried REV sideband on the K3, and the same thing still happens... Is there a resource I can read telling me EXACTLY what each data mode does? I have KE7X's book, and that does not explain why I am seeing what I am seeing... At least not to me... I am putting my macros together, and need to get my head around EXACTLY what the two modes do, as they set up the radio. -- Thanks and 73's, For equipment, and software setups and reviews see: www.nk7z.net for MixW support see; http://groups.yahoo.com/neo/groups/mixw/info for Dopplergram information see: http://groups.yahoo.com/neo/groups/dopplergram/info for MM-SSTV see: http://groups.yahoo.com/neo/groups/MM-SSTV/info ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
