I had a similar problem and found after I went through the configuration step one-by-one and crossed them off as I completed each step. Found that I was skipping the same step, worked correctly the last time. John K7JLT
Louis Brown <[email protected]> wrote: >I installed the 2m module per the instruction revision A3. When I go to >configure the BND MAP I’m not getting a choice for 144; it is missing when I >cycle through with BAND+ or BAND-. > >I verified the following settings: > >2M/4M = nor >FW_REVS = 2.12 > >I reset the EEPROM to default values but that does not fix it. >I’m getting power to the 2m module. > >Any idea what’s wrong? > >Thanks, >Lou >KD4HSO >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html >Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
