I've never heard of this happening before, Jack. I'd suggest uninstalling the 2-meter module to see if that is causing the problem. If so, my guess would be a damaged connector pin or component.
Wayne N6KR On Aug 21, 2014, at 4:46 PM, Jack Spitznagel <[email protected]> wrote: > PROBLEM: The HI CUR warning started to come on 3 - 5 minutes after the rig > has been turned on and is RECEIVING fine then the rig beeps 3 times and turns > itself off. > > PLEASE NOTE: This only happens in RECEIVE - all bands and modes including > 2M. The rig will tune and transmit. > > Observations: > > Volume is set at about 5 > Current is at 0.212 at V0 goes to about 0.230 A with the volume at 12 or so. > Voltage is at 13.7 and rock solid > PA.I reads 27C > OSC reads 32C > The heatsink area at back of the frame is cool to lukewarm. > The SUB indicator was flashing, but turning off the SUB does not change the > self shutdown behavior. > > What is it that is done during the KX3-2M installation that could have > triggered this? Is it something I could have accidentally tweaked in the > settings or is this going to trigger a visit to back to Elecraft? > Thanks, > > Jack - KD4IZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
