Hi all Thanks for suggestions. My problem has been fixed.
a) Pin 1 is connected to Tip and Pin 7 is connected to sleeve. b) Set FPH Bias and tap "7". Again tap "7" Everything works as expected. I have same level now with FPH Bias. I do not know why I need to tap "7" 73 de aki ja1nlx (2014/08/31 16:45), ayoshida wrote:
If CM-500 is connected to rear panel mic jack it works fine, however if it is connected to front panel mic jack via conversion connector I have a very low mic lebel with max mic level setting. If CM-500 is connected to KX3 it works fine. CM-500 mic plug to 8p plug connection in conversion connector is like this..... tip to pin-1 ring to pin 6 (K3 provides 8V regardless Bias ON/OFF) sleeve to pin 7 I have another electret condenser hand mic. If this mic is connected to K3 front panel mic jack it works fine. If CM-500 is connected to K2 (where 5V is provided to pin 6 of mic jack) using same conversion connector it works fine. Any suggestions please.
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
