Nope. The K3's RS232 connector must connect directly to the P3's "XCVR"
RS232 connector. The Y connector goes between the PC and the P3's "PC"
connector.
Alan N1AL
On 09/11/2014 06:51 PM, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Thu, 11 Sep 2014 17:46:03 -0700, you wrote:
Put the Y cable between the P3 and the computer etc, not on the K3 side. . The
K3 to P3 serial cable should not have any other devices sharing it.
73,
Eric
elecraft.com
REPLY:
Just to be clear: I have the "root" of the Y adaptor plugged into the
P3 jack which is labeled PC. One arm of the Y goes to the computer and
the other arm goes to the K3.
Is that correct?
73, Bill W6WRT
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
